Trend Snappy 3/32 drill bit only

Drill Bit and Bit Holder "Quick Drill" Set of 6

Drilling and screwdriving without having to change the drill bit? The ?Quick Drill? 2 in 1 drill bit holder will enable you do to this.Â After doing a drilling job, release the bracket by pulling it down and turn the spindle so you can access the other end.Â Secure the bracket again and off you go.Â This will save time and effort. The ?Quick Drill? set consists of 6 pieces in total, and h...

HSS Metal twist drill bit 2.5 mm Bosch 2608596676 Total length 57 mm TiN DIN 338 Cylinder shank 1 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

HSS Metal twist drill bit set 25-piece Bosch 2608587019 TiN DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

HSS Metal twist drill bit set 6-piece Bosch 2607010530 TiN DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

HSS Metal twist drill bit 1.5 mm Bosch 2608596666 Total length 40 mm TiN DIN 338 Cylinder shank 1 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

HSS Metal twist drill bit 10 mm Bosch 2608596751 Total length 133 mm TiN DIN 338 Cylinder shank 1 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

HSS Metal twist drill bit set 19-piece Bosch 2608587015 TiN DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

HSS Metal twist drill bit 1 mm Bosch 2608596661 Total length 34 mm TiN DIN 338 Cylinder shank 1 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

HSS Metal twist drill bit 6.5 mm Bosch 2608596716 Total length 101 mm TiN DIN 338 Cylinder shank 1 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

HSS Metal twist drill bit 3.5 mm Bosch 2608596686 Total length 70 mm TiN DIN 338 Cylinder shank 1 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

HSS Metal twist drill bit 3 mm Bosch 2608596681 Total length 61 mm TiN DIN 338 Cylinder shank 1 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

HSS Metal twist drill bit 2 mm Bosch 2608596671 Total length 49 mm TiN DIN 338 Cylinder shank 1 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

HSS Metal twist drill bit set 13-piece Bosch 2607010539 TiN Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

HSS Metal twist drill bit 7.5 mm Bosch 2608596726 Total length 109 mm TiN DIN 338 Cylinder shank 1 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

HSS Metal twist drill bit 5.5 mm Bosch 2608596706 Total length 93 mm TiN DIN 338 Cylinder shank 1 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

HSS Metal twist drill bit 13 mm Bosch 2608596781 Total length 151 mm TiN DIN 338 Cylinder shank 1 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

HSS Metal twist drill bit 6 mm Bosch 2608596711 Total length 93 mm TiN DIN 338 Cylinder shank 1 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

HSS Metal twist drill bit 9 mm Bosch 2608596741 Total length 125 mm TiN DIN 338 Cylinder shank 1 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

HSS Metal twist drill bit 11 mm Bosch 2608596761 Total length 142 mm TiN DIN 338 Cylinder shank 1 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

HSS Metal twist drill bit set 10-piece Bosch 2607010536 TiN DIN 338 Cylinder shank 1 Set

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

HSS Metal twist drill bit 8.5 mm Bosch 2608596736 Total length 117 mm TiN DIN 338 Cylinder shank 1 pc(s)

Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm². Malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. Enables up to 40% faster drilling than comparable drill bits with 118° drill bit tip and no split point. The lowest possible level of friction due to titanium-nitride coating, which effectively reduces friction deposit...

Trend Snappy 3/32 Drill Bit Only