Roughneck 64436 Wrecking Bar 36-inch

Gorilla Striking Bar 750mm (30in)

The Roughneck Gorilla Striking Bar is an industrial grade multifunction demolition bar and hammer It is manufactured from industrial grade steel with an I-beam shape It is drop forged hardened and tempered for strength and is powder coated with polished tips The striking bar features an extra-long prying claw which allows the bar to be driven deeper underneath a work piece and lift extra heavy b...

Multi-Purpose Bar Set 5 Piece

The Roughneck ROU64965 5 piece multi-purpose bar set consists of one each of the following- 12 inch x 12 inch hex Traditional Wrecking Bar Suitable for pulling large nails wrecking and dismantling18 inch x 58 inch hex Traditional Wrecking Bar Suitable for pulling large nails wrecking and dismantling7 inch Utility Bar Suitable for pulling nails wrecking dismantling and prying15 inch Utility Bar Sui...

Stanley 1-55-503 FatMax Spring Steel Wrecking Bar 60cm (24in)

Stanley FatMax Spring Steel Wrecking Bars - Stanley 1-55-503, This Stanley FatMax wrecking bar is an ideal tool for all builders, carpenters and plumbers and is widely used in factories, warehouses and the farming industry.Manufactured from round spring steel, which is hardened and tempered to ensure maximum strength and durability, and with double ended claw ends.Ideal for opening packing cases, ...

Wrecking Bar 525mm (21in) & Mini Bar Set

The Hultafors Wrecking Bar Set contains the following 1 x 10821 Wrecking Bar can be used for pulling out nails and for breaking scraping and lifting It has three different functions for pulling out nails and its wide ground contact surfaces and thin ends make it easy to use in narrow spaces and reduce the risk of leaving marks Length 525mm 21in Weight 650g 1 x 108 Mini Wrecking Bar can be used to ...

Hultafors Wrecking Bar & Mini Bar Set 52.5cm (21in)

The Hultafors Wrecking Bar Set contains the following: 1 x 108/21 Wrecking Bar, can be used for pulling out nails and for breaking, scraping and lifting. It has three different functions for pulling out nails and its wide, ground contact surfaces and thin ends make it easy to use in narrow spaces and reduce the risk of leaving marks. Length: 525mm (21in).Weight: 650g. 1 x 108 Mini Wrecking Bar, ca...

Ground Breaking Bar 10.3kg 1600 x 25mm

The Roughneck Ground Breaking Bar is ideal for use in locations and jobs where a normal crowbar is not sufficient or a pick not accurate enough This heavy-duty bar is made up of an inner solid crowbar with a chisel tip drop forged heat treated and hardened A weight slides up and down the central bar and exerts blows on the target material It is ideal for breaking up hard ground rocks concrete slab...

Gorilla Wrecking Bar Set (In Display Box) 5 Piece

The Roughneck Gorilla Wrecking Bar Set contains a selection of popular wrecking bars and is present in an eye catching display box Contains 2 x Wrecking Bars 380mm 15in & 300mm 12in made from drop forged alloy steel hardened and tempered with polished tips and hexagonal shank 2 x Mini Utility Bars 180mm 7in & 330mm 13in made from stamped alloy steel hardened and tempered with an integral nail pull...

Stanley 1-55-521 FatMax Spring Steel Wrecking Bar 106cm (42in)

Stanley FatMax Spring Steel Wrecking Bars - Stanley 1-55-521, This Stanley FatMax wrecking bar is an ideal tool for all builders, carpenters and plumbers and is widely used in factories, warehouses and the farming industry.Manufactured from round spring steel, which is hardened and tempered to ensure maximum strength and durability, and with double ended claw ends.Ideal for opening packing cases, ...

Stanley 1-55-504 FatMax Spring Steel Wrecking Bar 90cm (36in)

Stanley FatMax Spring Steel Wrecking Bars - Stanley 1-55-504, This Stanley FatMax wrecking bar is an ideal tool for all builders, carpenters and plumbers and is widely used in factories, warehouses and the farming industry.Manufactured from round spring steel, which is hardened and tempered to ensure maximum strength and durability, and with double ended claw ends.Ideal for opening packing cases, ...

Stanley 1-55-513 FatMax Spring Steel Wrecking Bar 76cm (30in)

Stanley FatMax Spring Steel Wrecking Bars - Stanley 1-55-513, This Stanley FatMax wrecking bar is an ideal tool for all builders, carpenters and plumbers and is widely used in factories, warehouses and the farming industry.Manufactured from round spring steel, which is hardened and tempered to ensure maximum strength and durability, and with double ended claw ends.Ideal for opening packing cases, ...

109 SB Adjustable Wrecking Bar 660mm (26in)

The Hultafors 109 Adjustable Wrecking Bar is manufactured from hardened high-alloy boron steel It is jointed at the claw to allow for nine settings Thanks to its ring gear it can handle the same strains as a normal wrecking bar Its wide ground contact surfaces and thin ends make it easy to use in narrow spaces and reduce the risk of leaving marks The claw is optimised for pulling out nails and can...

F430 Aluminium Wrecking Bar 430mm (16.9in)

The Hultafors F430 Wrecking Bar is manufactured from aluminium with a cone-shaped point Used when aligning flanges with bolt holes and for bending copper pipes with care The bar is inserted in the pipe which is then heated up and bent to shape This prevents damage to the actual pipe end Very common when fitting car body components Aluminium is easier and more comfortable to work with does not rust...

Roughneck Roughneck 48" Gorilla Bar

This bar-to-claw angle permits use near flat surfaces and increases leverage power by over 50%. Low profile claw fits further under work piece for increased prying power. This tool is designed for pulling large nails, wrecking/dismantling, and prying.SAFETY WARNING: Users and bystanders must wear eye, face and body protection when this tools is being used.TOOL CARE TIP: Keep in dry environment. Oi...

209 SB Adjustable Wrecking Bar 640mm (25in)

The Hultafors 209 SB Adjustable Wrecking Bar is manufactured in high quality steel with ergonomic rubber-clad handle Its articulated claw is adjustable to nine different positions With wide ground contact surfaces and thin ends make it easy to use and reduce the risk of leaving marks The claw is optimized for pulling out nails The curved section at the chisel makes space for the hand and minimizes...

Demolition & Lifting Bar 94cm (37in)

The Roughneck Demolition & Lifting Bar increases safety reducing the chance of injury Ideal for lifting floorboards removing ceiling boards breaking pallets removing roofing laths lifting heavy objects and all types of demolition work Also for lifting up large items eg slabs with less risk of items dropping when prising up The tusks are hardened and tempered and the heel rounded to distribute pres...

Mega Value Turbo Wrecking Bar

Turbo Wrecking Bar This Turbo Wrecking Bar is manufactured from high carbon steel for a strong and durable design, smash bricks easily with the chisel end and pry open doors or pull large nails with the other end, the ergonomic shaft provides a great user comfort. > DIY tools > 600mm > Dual ended > Wrecking/dismantling and prying > Ergonomic design > Strong and durable > Carbon steel - 6...

FatMax Spring Steel Wrecking Bar 1060mm (42in)

The Stanley Fat Max Spring Steel Wrecking Bars is an ideal tool for all builders carpenters and plumbers and is widely used in factories warehouses and the farming industry Manufactured from round spring steel which is hardened and tempered to ensure maximum strength and durability and with double ended claw ends Ideal for opening packing cases pulling out nails levering off shuttering etc

FatMax Spring Steel Wrecking Bar 600mm (24in)

The Stanley Fat Max Spring Steel Wrecking Bars is an ideal tool for all builders carpenters and plumbers and is widely used in factories warehouses and the farming industry Manufactured from round spring steel which is hardened and tempered to ensure maximum strength and durability and with double ended claw ends Ideal for opening packing cases pulling out nails levering off shuttering etc

FatMax Spring Steel Wrecking Bar 900mm (36in)

The Stanley Fat Max Spring Steel Wrecking Bars is an ideal tool for all builders carpenters and plumbers and is widely used in factories warehouses and the farming industry Manufactured from round spring steel which is hardened and tempered to ensure maximum strength and durability and with double ended claw ends Ideal for opening packing cases pulling out nails levering off shuttering etc

FatMax Spring Steel Wrecking Bar 760mm (30in)

The Stanley Fat Max Spring Steel Wrecking Bars is an ideal tool for all builders carpenters and plumbers and is widely used in factories warehouses and the farming industry Manufactured from round spring steel which is hardened and tempered to ensure maximum strength and durability and with double ended claw ends Ideal for opening packing cases pulling out nails levering off shuttering etc

Roughneck Roughneck 11" Double Ended Nail Puller

This tools is designed for pulling nails, wrecking/dismantling and prying. It has an integral nail puller at both ends. Ideal for removal of embedded nails. Made from hardened and tempered drop forged steel.SAFETY WARNING: Users and bystanders must wear eye, face and body protection when this tools is being used.TOOL CARE TIP: Keep in dry environment. Oil lightly to prevent rusting.